Omniinetpasswd - HP Data Protector A.06.11 Command Line Interface Manual

omniinetpasswd

manages the local Data Protector Inet configuration on Windows systems where the
Inet process must be run under a specific user account, and sets a user account to
be used by the Installation Server during remote installation
nl
(this command is available on systems with any Data Protector component installed)
omniinetpasswd
SYNOPSIS
omniinetpasswd -version | -help
omniinetpasswd -add {User@Domain | Domain\User...} [Password]
omniinetpasswd -delete {User@Domain | Domain\User...}
omniinetpasswd -modify {User@Domain | Domain\User...} [Password]
omniinetpasswd -list [Domain]
omniinetpasswd -clean
omniinetpasswd –[no_]inst_srv_user {User@Domain | Domain\User...}
DESCRIPTION
On specific Windows operating systems, the Data Protector Inet process must be run
under a specific operating system user account rather than under the local user
account SYSTEM. Additionally, on Windows Server 2008 systems, the Data Protector
Installation Server must use a specific operating system user account for remote
installation. The omniinetpasswd command provides functionality for management
of Inet configuration on the local system, and functionality for setting a user account
that will be used by the Installation Server during remote installation. Use command
options -add, —delete, -modify, -list, and -clean for local Inet configuration
management, and options -inst_srv_user and -no_inst_srv_user for setting
a user account to be used for remote installation.
Note that omniinetpasswd does not add, remove, or change user accounts in the
operating system configuration.
OPTIONS
-version
Displays the version of the omniinetpasswd command.
-help
Displays the usage synopsis for the omniinetpasswd command.
-add {User@Domain | Domain\User} [Password]
Command line interface reference 345