Omnisrdupdate; Omnisv; Omnitrig; Sanconf - HP Data Protector A.06.11 Command Line Interface Manual

omnisrdupdate

Updates the System Recovery Data (SRD) file.
This command is available on systems with the Data Protector User Interface
component installed.

omnisv

Starts, stops, or displays the status of Data Protector daemons (HP-UX, Solaris,
or Linux systems) or services (Windows systems).
This command is available on the Data Protector Cell Manager.

omnitrig

Triggers Data Protector scheduled backups.
This command is available on the Data Protector Cell Manager.

sanconf

Auto-configures a library, modifies an existing library or drive configuration, or
removes drives from a library configuration, within a SAN environment.
This command is available on systems with the Data Protector User Interface
component installed.
upgrade_cm_from_evaa
Upgrades the EVADB entries created by the HP StorageWorks EVA Agent (legacy)
to the SMISDB entries created by the HP StorageWorks EVA SMI-S Agent.
This command is available on the Data Protector Cell Manager.
util_cmd
Sets, retrieves or lists the parameters stored in the Data Protector Oracle, SAP
R/3, VMware Virtual Infrastructure (VMware), Informix, and Sybase configuration
files.
This command is available on systems with any Data Protector component
installed.
util_oracle8.pl
Configures an Oracle database and prepares the environment for backup, and
checks the configuration of an Oracle database.
This command is available on systems with the Data Protector Oracle
Integration component installed.
util_vmware.exe
Configures a VMware datacenter, checks the configuration of a VMware
datacenter, and lists all configured VMware datacenters.
This command is available on systems with the Data Protector VMware
Integration component installed.
32