Omnistat - HP Data Protector A.06.11 Command Line Interface Manual

omnistat

displays the status of active Data Protector backup and restore sessions
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnistat
SYNOPSIS
omnistat -version | -help
omnistat -session SessionID [-status_only | -monitor | -detail]
omnistat [-user Username] [-mount] [-error] [-detail]
omnistat -previous [-user Username] [{-since Date | -until Date} |
-last Number] [-failed]
Date
[YY]YY/MM/DD
DESCRIPTION
The omnistat command displays information on active sessions. You can view all
active sessions (default) or only details of a specific session. An active session is
referenced by its SessionID.
OPTIONS
-version
Displays the version of the omnistat command.
-help
Displays the usage synopsis for the omnistat command.
-session SessionID
Displays detailed information on the single active session identified by this
SessionID.
-monitor
omnistat connects to the specified active session and starts monitoring the
progress of the session.
-status_only
Displays only the overall status of the active session.
-detail
Command line interface reference 265