HP Data Protector A.06.11 Command Line Interface Manual page 417

The Data Protector configuration parameters for an integration are normally written
to the Data Protector configuration files:
• during the configuration of the integration
• during the creation of a backup specification if the configuration parameters are
changed
• when the configuration parameters are changed
All sublist configuration parameters in the configuration files are optional.
RETURN VALUES
The util_cmd command displays a short status message after each operation
(written to the standard error):
•
Configuration read/write operation successful.
This message is displayed when all the requested operations have been completed
successfully.
•
Configuration option/file not found.
This message appears when either an option with the specified name does not
exist in the configuration, or the file specified as the -local parameter does
not exist.
•
Configuration read/write operation failed.
This message is displayed if any fatal errors occurred, for example: the Cell
Manager is unavailable, the Data Protector configuration file for a specific
integration is missing on the Cell Manager, etc...
OPTIONS
-version
Displays the version of the util_cmd command.
-help
Displays the usage synopsis for the util_cmd command.
-getconf[ig] integration instance
Lists the Data Protector configuration files parameters for the specified integration
and instance to the standard output, unless the -local option is specified.
-getopt[ion] [integration instance] option_name
Command line interface reference 417