HP Data Protector A.06.11 Command Line Interface Manual page 442

-instrec
Starts the Data Protector GUI with the Instant Recovery context activated.
-monitor
Starts the Data Protector GUI with the Monitor context activated.
-report
Starts the Data Protector GUI with the Reporting context activated.
-restore
Starts the Data Protector GUI with the Restore context activated.
-users
Starts the Data Protector GUI with the Users context activated.
EXAMPLES
1.
manager
This Windows command will start the Data Protector GUI with all contexts
activated.
2.
xomni -display host1:0
This UNIX command will start the Data Protector Java GUI with all contexts
activated on the system with the hostname "host1".
3.
manager -admin -monitor -report -server host3
This Windows command will start the Data Protector GUI with the Devices &
Media, Monitor, and Reporting contexts activated and will connect to the Cell
Manager with the hostname "host3".
4.
xomni -admin -monitor -report -server host2
This UNIX command will start the Data Protector Java GUI with the Devices &
Media, Monitor, and Reporting contexts activated and will connect to the Cell
Manager with the hostname "host2".
SEE ALSO
ob2install(1M), omniintro(9), omnimigrate.pl(1M), omnisetup.sh(1M), omniusers(1),
upgrade_cm_from_evaa(1M), winomnimigrate.pl(1M)
442