HP Data Protector A.06.11 Command Line Interface Manual page 388

-password Password
Sets the password for the above specified username.
-check_vls
Specifies that the connection to the VLS Device needs to be checked.
-client ClientHostNameorIPAddress
Specifies the name or the IP address of the client imported into the Data Protector
cell.
EXAMPLES
1. To check the connection to the VLS Device, run:
omnistoreapputil -check_connection -hostname
client.company.com -port 5988 -user Admin -password ***
-check_vls
SEE ALSO
omnicc(1), uma(1M)
388