HP Data Protector A.06.11 Command Line Interface Manual page 253

– Filesystem objects that do not match the condition in the object creation time
filter are listed anyway. However, in this case, the object creation time fields
remain empty.
– If you clear certain filesystem objects from a backup specification, these
filesystem objects will not be included in the report even if the objects exist in
the IDB.
The above note is not applicable for objects of the Bar type (integration objects).
obj_avesize
Lists all objects, specified for backup in selected backup specifications, which
have a valid backup. A valid backup means that the backup completed
successfully and its protection has not expired. For each object average full and
average incremental backup size is displayed. If HOST object is used: Host
object is expanded (get disks) and report checks that expanded objects are in
database. UNIX, NetWare, and Windows filesystems are supported.
Report options are:
[-datalist BackupSpecificationName ...]
[-group BackupSpecificationGroup]
[-days NoOfDays]
fs_not_conf
Displays a list of mounted filesystems which are not in selected backup
specifications. Output is a list of filesystems. If HOST object is used, the report
will not report any disk from client as not configured (assuming that HOST backup
will backup all disks). If HOST object is used, the report will not report any disk
from client as not configured (assuming that HOST backup will backup all disks).
Report options are:
[-datalist BackupSpecificationName ...]
[-group BackupSpecificationGroup]
dl_info
Shows information about all selected backup, object copy, object consolidation,
and object verification specifications (type, session type, session specification
name, group, owner, and pre & post exec commands). HOST does not influence
report. By default, the report is generated for all session specifications. Use the
report filtering options to generate a report only for a specific backup, object
copy, object consolidation, or object verification specification.
Report options are:
[-datalist BackupSpecificationName ...]
[-group BackupSpecificationGroup]
[-copylist_sch ScheduledCopySpecificationName ...]
Command line interface reference 253