HP Data Protector A.06.11 Command Line Interface Manual page 362

Migrates the clients from the old Cell Manager to the new Cell Manager. The
old Cell Manager will keep the clients in the configuration files although it will
not be their Cell Manager anymore.
If any of the clients is inaccessible, it will not be imported to the new cell. You
can re-run the omnimigrate.pl command with this option when the clients
are accessible to migrate them to the new Cell Manager.
The old Cell Manager will automatically become a client in the new cell. You
can uninstall the Cell Manager component from the old Cell Manager, because
it is not necessary anymore.
The option should be used only on the new Cell Manager.
-configure_idb
Configures the IDB from the old Cell Manager for use on the new Cell Manager.
The option should be used only on the new Cell Manager.
-configure_cm
Reconfigures the configuration data transferred from the old Cell Manager for
use on the new Cell Manager.
The option should be used only on the new Cell Manager.
-configure
Combines -configure_clients, -configure_idb, and -configure_cm
options. This is the recommended way to run the omnimigrate.pl command.
The option should be used only on the new Cell Manager.
RETURN VALUES
0
1-4
ERRORS
1
2
3
362
Successfully finished.
An error occurred.
A generic error occurred.
Migration of IDB catalogs failed.
Configuration error (Cell Manager configuration error or an error during
the import of clients) occurred.