HP Data Protector A.06.11 Command Line Interface Manual page 367

-mahost DeviceHostName
Specifies the name of the client, where the restore device is attached and a
Media Agent started.
-policy LogicalDevicePolicy
Specifies the policy ID for the device specified by the -dev option. Policy can
be defined as:
1 (Standalone),
3 (Stacker)
5 (6300 MO jukebox)
6 (Exchange through cmd execution)
8 (GRAU DAS exchanger library)
9 (Silo medium library)
10 (SCSI exchanger)
11 (RSM exchanger)
-type LogicalDeviceType
Specifies the media type for the media in the device specified by the -device
option. Media type numbers are defined in the HP Data Protector product
announcements, software notes, and references.
-description DeviceDescription
This is an optional parameter that specifies the logical device description.
-blksize BlockSize
This is an optional parameter that specifies the block size the device is going to
use when accessing media.
MediaOptions
-maid MediumID
Specifies the medium identification number of the medium that contains the object
data; for example 8c04110a:3b0e118b:041c:0001. If unknown is specified,
each medium will be accepted as valid and restore will be attempted. Whole
medium will be scanned for the requested object and it may take a very long
time, if the object is not on the medium. Mount prompt in such case will request
the next medium, without specifying the medium label.
-slot slot1[:flip]
Specifies the slot identifier of the slot, where the required media is located, thus
enabling Data Protector to automatically load media from the exchanger slots.
Note that the sequence has to match the sequence in the list created using the
-maid option.
Command line interface reference 367