HP Data Protector A.06.11 Command Line Interface Manual page 160

Moves magazine MagazineDescription from the current pool to the pool
specified by NewPoolName.
-modify_medium Medium NewMediumLabel NewLocation
Modifies medium with the specified Medium . Note that you should always enter
the medium label NewMediumLabel and location NewLocation in that
sequence.
-modify_magazine MagDescription NewLocation [NewMagDescription]
Changes the location of the magazine MagDescription to NewLocation. If
NewMagDescription is specified, it is assigned to the magazine as a new
MagazineDescription. Note that each magazine must have a unique
MagazineDescription.
-reset_poor_medium Medium
Resets the media condition factors. Once the medium has expired (its maximum
usage criteria), it is marked as poor and can no longer be used for backup.
This option resets the medium quality status, thus enabling it to be used for
backup. You have to be very cautious using this option, because a backup stored
on an expired medium might not be recoverable.
-reset_wp_medium Medium
Removes the write-protected flag for the specified medium from the MMDB, thus
making the medium available for writing.
-list_pool[PoolName] [-detail]
Displays all the media from pool PoolName. The report shows: medium label,
status, location, appendability and protection. Appendability is shown under
item FULL. If displayed status under FULL is "YES" then medium is unappendable,
otherwise it is appendable. If PoolName is not specified, the command lists all
the configured media pools. This report shows: pool name, status, media class,
the number of media and free space in pool.
-detail
Displays information in a more detailed format.
-show_pool_alloc PoolName
Displays the sequence in which the media from the specified pool will be used
for backup. The report shows: sequence, medium label and location.
-list_scratch_media PoolName
Displays media from the specified pool which are not protected and can be used
for backup. The report shows sequence, medium label and location.
-show_repository_alloc Library PoolName
Displays the order in which the media in the repository of the specified Library
will be used. The report shows: sequence, medium label, location and slot number.
160