HP Data Protector A.06.11 Command Line Interface Manual page 408

The stat command can be used to query the status of a specific slot (i.e. 'stat
290' or 'stat S35') or a related group of slots (i.e. 'stat D' will query all drives,
'stat S' will query all repository slots, etc.).
If no additional arguments are specified, the stat command will query and print
the status information for all slot IDs it can address.
modesense [page]
Reads the vendor specific data and unit settings from the unit and displays them.
You can limit the display only to certain pages by using the page parameter. If
the page parameter is not specified, all pages are displayed.
test
Checks if the unit is ready. If the unit is not used by any process, then the unit is
ready. If it is, however, used either by the robotics, backup or restore processes
then it is not ready.
exit | bye | quit
Exits the command mode.
doorlock [0 | 1]
If the input parameter is 1, this command locks the library mail slot door; if it is
0, it unlocks it.
-enter slot
Enters media into a specified library slot.
-eject slot
Ejects media from a specified library slot.
NOTES
Do not use the uma utility while Data Protector backup or restore is running. On
UNIX, MPE/iX, and NetWare systems the -tty option is obligatory. On Windows
systems it is not used.
EXAMPLES
1. Uma can be started both interactively or in batch mode. The only option which
needs to be specified (except for backup devices with library robotics connected
to an NDMP Server) is the pathname of the device file which controls the robotics
of the target autochthons:
AMA -octal /Dave/spot/sctl0
*** PROGRAM: UMA VERSION: HP Data Protector A.06.11
408