HP Data Protector A.06.11 Command Line Interface Manual page 310

-autorecover [Autorecover Options] [General Options]
Starts the restore of the IDB in the autorecover mode. The omnidbrestore
command in the autorecover mode scans the obrindex.dat file for the Media
Options, RMA Options and VRDA options and arguments needed for the
restore. When the options and arguments are retrieved, the restore of the IDB is
performed using the retrieved options and arguments to the original location
overwriting the current files.
-read OptionFile [General Options]
Starts the restore of the IDB in the read mode. Omnidbrestore reads the options
and arguments from the file that has been created manually or using the
-autorecover -save OptionFile command. This is useful in case the restore
devices are different from the backup devices (or attached to a different system).
In such a case the OptionFile has to be manually updated with the appropriate
restore device data before the restore is started.
RMA_Options
-mahost DeviceHostname
Specifies the client with the attached backup device.
-policy LogicalDevicePolicy
Specifies the backup device policy ID. Policy can be defined as 1 (Standalone),
3 (Stacker), 5 (Jukebox), 6 (external control), 8 (Grau DAS exchanger library),
9 (STK Silo medium library) or 10 (SCSI Library).
-type DeviceType
Specifies the media type. Media type numbers are specified in the HP Data
Protector product announcements, software notes, and references.
-dev PhysicalDevice
Physical device path.
-name LogicalDeviceName
Specifies the backup device name. Note that this is only used in output messages
and can be omitted.
-description DeviceDescription
Specifies the backup device description. Note that this is only used in output
messages and can be omitted.
-blksize BlkSize
Specifies the block size that was used when the backup was made.
-ioctl RoboticsDevice
Physical path of the library device.
310