Fujitsu Eternus DX80 S2 User Manual page 77

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
5-2
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Destination label
The following figure shows an example of attaching destination labels on the QSFP
cables that connect the controller enclosure to drive enclosure 1.
Drive enclosure 1
(Added drive enclosure)
Controller enclosure
Connect the DI (OUT) port of CM#0 or IOM#0 in the enclosure that has the highest DE-
ID (drive enclosure number) to the DI (IN) port of IOM6#0 in the drive enclosure that is
to be added.
Drive enclosure
to be added
Copyright 2012 FUJITSU LIMITED
Drive enclosure number
IOM (I/O module) number
CM (controller) number
77
P3AM-4842-03ENZ0