Fujitsu Eternus DX80 S2 User Manual page 140

Appendix A Event Notification Message List
A.2 Message List
Sense code
SK
06
06
06
06
06
06
06
06
06
06
06
06
06
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
ASC ASCQ
E2 92 Disconnection of a REC path between cabinets is
detected.
F2 80 Rebuild has started.
F2 80 Redundant copy is being performed.
F2 81 Rebuild to the drive has started.
F2 82 Rebuild to the hot spare is complete.
F2 82 Redundant copy is complete.
F2 83 Rebuild to the drive is complete.
F2 84 Copyback is being performed.
F2 85 Copyback is complete.
F2 88 Rebuild to the hot spare or the replaced drive is
complete, but Bad Data (data lost identifier) exists.
F2 89 Rebuild has not started.
F2 89 Redundant copy has not started.
F2 8A Rebuild is halted.
Copyright 2012 FUJITSU LIMITED
Description
140
Remarks
This sense code is notified when
"Remote Path Error" is enabled for
Error Severity Level in the event notifi-
cation setting.
This is not notified during mainte-
nance operations.
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during
maintenance operations.
This sense code is notified when
"Redundant" is enabled for Error
Severity Level in the event notification
setting. This is not notified during
maintenance operations.
These sense codes are notified when
"Rebuild/Copyback w/ redundant" is
enabled for Error Severity Level in the
event notification setting.
They are not notified during
maintenance operations.
This sense code is notified when
"Complete Redundant Copy" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during
maintenance operations.
These sense codes are notified when
"Rebuild/Copyback w/ redundant" is
enabled for Error Severity Level in the
event notification setting.
They are not notified during
maintenance operations.
These sense codes are notified when
"Complete rebuild" is enabled for Error
Severity Level in the event notification
setting.
They are not notified during mainte-
nance operations.
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during
maintenance operations.
This sense code is notified when
"Redundant" is enabled for Error
Severity Level in the event notification
setting. This is not notified during
maintenance operations.
This sense code is notified when
"Rebuild/Copyback w/o redundant" is
enabled for Error Severity Level in the
event notification setting.
This is not notified during
maintenance operations.
P3AM-4842-03ENZ0