Fujitsu Eternus DX80 S2 User Manual page 97

Appendix A Event Notification Message List
A.1 Message Format
No.
2
3
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Part name Field name
HEADER
Copyright 2012 FUJITSU LIMITED
Item
Time stamp The local time when the event is detected is output in the
following format:
•
For RFC3164
Mmm dd hh:mm:ss
-
Mmm
Abbreviation of each month (Jan – Dec)
-
dd
Date. If the date is a single digit, a blank is output
before the date number.
-
hh:mm:ss
Local time. "hh" indicates the hour (00 – 23),
"mm" indicates minutes (00 – 59), and "ss"
indicates seconds (00 – 59).
•
For RFC5424
yyyy-mm-ddThh:mm:ss±hh:mm
-
yyyy
The year is displayed with four digits.
-
mm
The month is displayed with two digits (01 – 12).
-
dd
The date is displayed with two digits (01 – 31).
"T" follows this item.
-
hh:mm:ss
Local time. "hh" indicates the hour (00 – 23),
"mm" indicates minutes (00 – 59), and "ss"
indicates seconds (00 – 59). A blank follows this
item.
-
±hh:mm
Time differences between the local time and the
GMT. The value for the time zone specified in the
date and time setting of ETERNUS Web GUI or
ETERNUS CLI is displayed. "hh" indicates the
hour (00 – 23) and "mm" indicates minutes (00 –
59). A blank follows this item.
Host name IP address of the sender port (MNT or RMT) of the
ETERNUS DX Disk storage system is output in the
following format:
xxx.xxx.xxx.xxx
The IPv4 address is output based on the "IETF STD13,
RFC 1035" specification.
A blank follows this item.
97
Description
P3AM-4842-03ENZ0