Fujitsu Eternus DX80 S2 User Manual page 136

Appendix A Event Notification Message List
A.2 Message List
Event type
I 01030010
I 01030020
I 01050010
I 01050020
I 01050030
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP
Trap
code
Trap No.
9 %d volume(s) created
•
For Standard volumes, SDVs, or SDPVs
No=&a Name=&b Type=&c Capacity=&d
RAID_Group_No=&e RAID_Group_Name=&f
•
For TPVs
No=&a Name=&b Type=&c Capacity=&d Pool_No=&g
Pool_Name=&h
%d volumes are created.
%d: Quantity
&a: Volume number
&b: Volume name
&c: Volume type
&d: Capacity
&e: RAID group number (only for Standard/Open volume,
SDV, or SDPV)
&f: RAID group name (only for Standard/Open volume, SDV,
or SDPV)
&g: TPP number (only for Standard/Open volume or TPV)
&h: TPP name (only for Standard/Open volume or TPV)
9 %d volume(s) deleted
No=&a Name=&b
%d volumes are deleted.
This message is not notified when the deletion reservation
function is used to delete the SDPV.
%d: Quantity
&a: Volume number
&b: Volume name
9 Power on completed ($a)
Detail information is not displayed.
The device status is changed to Ready.
$a: VxxLxx-xxxx (Firmware version)
9 Shutdown started
Detail information is not displayed.
Device shutdown has started.
9 Controller firmware updated ($a)
Detail information is not displayed.
Controller firmware version is updated.
$a: VxxLxx-xxxx (Firmware version)
Copyright 2012 FUJITSU LIMITED
Upper: Message
Middle: Detail information
Lower: Description
136
Remarks
These messages
are notified when
"Operated Vol-
ume" is enabled
for Informational
Level in the event
notification
setting.
These messages
are notified when
"Power off/on
Apply Firmware"
is enabled for
Informational
Level in the event
notification
setting.
P3AM-4842-03ENZ0