Fujitsu Eternus DX80 S2 User Manual page 98

Appendix A Event Notification Message List
A.1 Message Format
No.
4
5
6
7
8
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Part name Field name
MSG TAG
CONTENT
Copyright 2012 FUJITSU LIMITED
Item
Program or Name of the program or process that generates the
process message is output.
"Storage" is output for all the messages.
For the "RFC3164" format, a colon [:] and then a blank,
which indicate the end of the TAG field, follow this item.
For the "RFC5424" format, a blank follows this item.
CM No. and CM number of the controller that outputs the message
message type and the message type are output.
"0" or "1" is output according to the message for the CM
No.
"0" is output for the message type.
For the "RFC3164" format, a comma and then a blank
follow this item.
For the "RFC5424" format, a blank follows this item.
Message serial The message serial number is displayed for each con-
number troller.
For the "RFC3164" format, a blank follows this item.
For the "RFC5424" format, a blank, a hyphen, and a
blank follow this item in this order.
Event type and The message event type and the event code that are
event code separated by a blank are output.
One of the following letters is output as an event type:
"P", "J", "M", "I", "R"
Event code is an 8-digit hexadecimal number according
to the message.
Refer to "A.2 Message List" (page 104)
Message Message that indicates the event and its detailed infor-
mation are output in text format. For multiple process
results, each process result is enclosed by brackets.
Refer to "A.2 Message List" (page 104)
98
Description
for details.
for details.
P3AM-4842-03ENZ0