Fujitsu Eternus DX80 S2 User Manual page 62

Chapter 5 Installing Optional Products
5.1 Installing Drives
4
4-1
4-2
4-3
4-4
5
6
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Install the new drive.
Press the catch on the drive lock lever to unlock it.
Catch
Lock lever
Insert the drive all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
WARNING
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
Check that the newly installed drive's DRIVE READY LED lights up green.
Repeat Step 3 and Step 4
If a wrist strap is used, remove the wrist strap.
Copyright 2012 FUJITSU LIMITED
Do
• Hold the drive with both hands to protect against jarring.
Lock lever
for each additional drive.
62
P3AM-4842-03ENZ0