Fujitsu Eternus DX80 S2 User Manual page 110

Appendix A Event Notification Message List
A.2 Message List
Event type
P 21830xxx
P 21830xxx
P 21830xxx
P 22SSMM0p 2
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
code
TrapItemID
No.
2 21830xxx
2 21830xxx
2 21830xxx
2200MM0p
Copyright 2012 FUJITSU LIMITED
Upper: Message
Trap
Sensor Lower: Description
Info
- Disk Drive DE#uu-Disk#nn(SAS xxxGB
yykrpm ccccccc) Redundant Copy end
<pppppppppppp ssssssssssss rrrr>
Redundant copy of a HDD is complete.
xxx: RAID group number
uu: DE-ID
nn: Disk slot number (decimal)
3.5" drives: 00 - 11
2.5" drives: 00 - 23
xxx: Disk capacity (GB/TB)
yy: Disk speed
cc...: Disk type (RAID level)
pp...: Component number
ss...: Serial number
rr...: Version
- SSD 3.5 DE#uu-Slot#nn(SAS xxxGB ccccccc)
Redundant Copy end <pppppppppppp
ssssssssssss rrrr>
Redundant copy of a 3.5" SSD is complete.
xxx: RAID group number
uu: DE-ID
nn: Drive slot number (0 - 11 (decimal))
xxx: Drive capacity (GB/TB)
cc...: Drive type (RAID level)
pp...: Component number
ss...: Serial number
rr...: Version
- SSD 2.5 DE#uu-Slot#nn(SAS xxxGB ccccccc)
Redundant Copy end <pppppppppppp
ssssssssssss rrrr>
Redundant copy of a 2.5" SSD is complete.
xxx: RAID group number
uu: DE-ID
nn: Drive slot number (0 - 23 (decimal))
xxx: Drive capacity (GB/TB)
cc...: Drive type (RAID level)
pp...: Component number
ss...: Serial number
rr...: Version
-
Controller Module#m(zz) LAN PORT#p Fault
<pppppppppppp ssssssssssss rrrr>
CM LAN port is disconnected.
SS: Component subtype
MM: CM module ID (10 – 11)
p: Port number (0 – 1)
m: CM number (0 – 1)
zz: Model name (DX80S2 or DX90S2)
pp...: Component number
ss...: Serial number
rr...: Version
110
Remarks
These messages
are notified when
"Complete
Redundant Copy"
is enabled for
Error Severity
Level in the event
notification
setting.
These messages
are not notified
during
maintenance
operations.
These messages
are notified when
"Complete
Redundant Copy"
is enabled for
Error Severity
Level in the event
notification
setting.
These messages
are not notified
during
maintenance
operations.
These messages
are notified when
"Parts Error" is
enabled for Error
Severity Level in
the event notifica-
tion setting. They
are not notified
during mainte-
nance operations.
P3AM-4842-03ENZ0