Hardware Information; Heartbeat Led Activity - Qlogic SANbox 5802V Interface Manual

5 – Switch Configuration
Displaying Switch Information

Hardware Information

Enter the
including fans, power supplies, internal temperature, and Heartbeat LED status.
SANbox #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius
FanStatus (1)
FanStatus (2)
FanDirection (1)
FanDirection (2)
PowerSupplyStatus (1)
PowerSupplyStatus (2)
HeartBeatCode
HeartBeatStatus
The HeartBeatCode and HeartBeatStatus entries indicate the Power-on Self Test
(POST) results revealed by the Heartbeat LED blink patterns. The result is normal
operation or a blink pattern indicating a critical error as described in
Refer to the SANbox 5802V Fibre Channel Switch Installation Guide for more
information about the Heartbeat LED and its blink patterns.
HeartBeatCode–HeartBeatStatus
1–Normal
2–AppDied
3–PostFailed
4–CorruptFilesystem
5–Overheating
5-8
Show Chassis command to display the status of the switch hardware
Table 5-1. Heartbeat LED Activity
36
Good
Good
BackToFront
BackToFront
Good
Good
1
Normal
Description
One blink per second–Normal operation
Two blink cluster–Internal firmware failure
Three blink cluster–Fatal POST error
Four blink cluster–Configuration file system
error
Five blink cluster– Over temperature
S
Table 5-1.
59263-01 A