Show Setup Snmp - Qlogic SANbox 5802V Interface Manual

14 – Command Reference

Show Setup Snmp

Show Setup Snmp
Displays the current SNMP settings.
Authority
None
Syntax
show setup snmp
common
trap
Keywords
common
Displays SNMP configuration parameters that are common to all traps. To display
common and trap-specific parameters, omit the keyword. Refer to
descriptions of the common configuration parameters.
trap
Displays trap-specific SNMP configuration parameters. To display common and
trap-specific parameters, omit the keyword. Refer to
of the trap-specific configuration parameters.
Examples
The following is an example of the Show Setup Snmp Common command:
SANbox #> show setup snmp common
SNMP Information
----------------
SNMPEnabled
Contact
Location
Description
ObjectID
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
The following is an example of the Show Setup Snmp Trap command:
SANbox #> show setup snmp trap 1
SNMP Information
----------------
Trap1Address
Trap1Port
Trap1Severity
Trap1Version
Trap1Enabled
14-176
True
<sysContact undefined>
<sysLocation undefined>
SANbox 5802V FC Switch
1.3.6.1.4.1.3873.1.9
True
True
False
10.0.0.254
162
warning
2
False
S
Table 14-29
Table 14-30 for descriptions
59263-01 A
for