Zoneset - Qlogic SANbox 5802V Interface Manual

14 – Command Reference

Zoneset

Zoneset
Manages zone sets and component zones across the fabric.
Authority
Admin session and a Zoning Edit session. Refer to the
page 14-216
and Zones keywords are available without an Admin session. You must close the
Zoning Edit session before using the Activate and Deactivate keywords.
Syntax
zoneset
activate [zone_set]
active
add [zone_set] [zone_list]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deactivate
delete [zone_set]
list
remove [zone_set] [zone_list]
rename [zone_set_old] [zone_set_new]
zones [zone_set]
Keywords
activate [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active
zone set. Close the Zoning Edit session before using this keyword.
active
Displays the name of the active zone set. This keyword does not require Admin
session.
add [zone_set] [zone_list]
Adds a list of zones and aliases given by [zone_list] to the zone set given by
[zone_set]. Use a <space> to delimit zone and alias names in [zone_list]. You
must enter the
copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the
zones from the zone set given by [zone_set_source]. You must enter the
Zoning Save
14-208
for information about starting a Zoning Edit session. The Active, List,
Zoning Save command afterwards to save your changes.
command afterwards to save your changes.
S
"Zoning Edit" command on
59263-01 A