Create An Snmp Version 3 User Account; Display Snmp Version 3 User Accounts - Qlogic SANbox 5802V Interface Manual

A

Create an SNMP Version 3 User Account

To create an SNMP version 3 user account, enter the
as shown in the following example:
SANbox #> admin start
SANbox (admin) #> snmpv3user add
A list of SNMPV3 user attributes with formatting and default values as
applicable will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the default value.
If you wish to terminate this process before reaching the end of the list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username
Group
Authentication
AuthType
AuthPhrase
Confirm AuthPhrase
Privacy
PrivType
PrivPhrase
Confirm PrivPhrase
Do you want to save and activate this snmpv3user setup ?
SNMPV3 user added and activated.

Display SNMP Version 3 User Accounts

To display SNMP version 3 user accounts, enter the Snmpv3user List command
as shown in the following example:
SANbox #> snmpv3user list
Username
--------
snmpuser1
59263-01 A
13 – Simple Network Management Protocol Configuration
(8-32 chars)
(0=ReadOnly, 1=ReadWrite) [ReadOnly
(True/False)
(1=MD5, 2=SHA)
(8-32 chars)
(True/False)
(1=DES)
(8-32 chars)
Group
-----
ReadWrite
Managing the SNMP Version 3 Configuration
Snmpv3user
: snmpuser1
] : 1
[False ] : t
[MD5 ] : 1
: ***********
: ***********
[False ] : t
[DES ] : 1
: ********
: ********
(y/n): [n] y
AuthType
--------
MD5
Add command
PrivType
--------
DES
13-7