Qlogic SANbox 5802V Interface Manual page 356

14 – Command Reference
Show Switch
PrincipalSwitchRole
POSTFaultCode
POSTStatus
TestFaultCode
TestStatus
BoardTemp (1) - Degrees Celsius
SwitchTemperatureStatus
14-182
Table 14-41. Switch Operational Parameters (Continued)
Parameter Description
Principal switch status. True indicates that this
switch is the principal switch.
Fault code from the most recent Power-on self test
Status from the most recent Power-on self test
Fault code from the most recent switch test
Status from the most recent switch test
Internal switch temperature at circuit board
sensor 1.
Switch temperature status: Normal, Warning, Fail-
ure.
S
59263-01 A