Modifying A Data Capture Configuration - Qlogic SANbox 5802V Interface Manual

12 – Call Home Configuration
Managing the Call Home Database

Modifying a Data Capture Configuration

Enter the
Tech_Support_Center profile as shown in the following example:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture edit
Capture Entries for Profile:
Index
-----
1
Please select a capture entry from the list above ('q' to quit): 1
A list of attributes with formatting and current values will follow.
Enter a value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Value (press ENTER to accept the default, 'q' to quit):
TimeOfDay
DayOfWeek
Interval
The selected capture entry has been edited for profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
12-14
Capture Edit command to modify a data capture configuration in the
Tech_Support_Center
TimeOfDay DayOfWeek
--------- ---------
02:00 Sat
(HH:MM)
(Sun,Mon,Tue,Wed,Thu,Fri,Sat)
(decimal value, 1-26 weeks)
Interval
--------
1 (weeks)
[02:00]
[Sat ]
[1 ]
S
59263-01 A