Deleting An Association - Qlogic SANbox 5802V Interface Manual

4 – Network Configuration
Managing IP Security

Deleting an Association

To delete a user-defined association, enter the
command as shown in the following example:
SANbox #> admin start
SANbox (admin) #> ipsec edit
SANbox (admin-ipsec) #> ipsec association delete association_1
The security association will be deleted. Please confirm (y/n): [n] y
SANbox (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
4-16
Ipsec Association Delete
S
59263-01 A