Managing The Call Home Database - Qlogic SANbox 5802V Interface Manual

12 – Call Home Configuration

Managing the Call Home Database

Enter the
configuration as shown in the following example.
SANbox #> show setup callhome
Callhome Information
--------------------
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnabled
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnabled
ContactEmailAddress
PhoneNumber
StreetAddress
FromEmailAddress
ReplyToEmailAddress
ThrottleDupsEnabled
+ indicates active SMTP server
Managing the Call Home Database
To modify the Call Home database, you must open an Admin session with the
Admin
changes at the same time through Telnet, QuickTools, Enterprise Fabric Suite
2007, or another management application. You must also open a Callhome Edit
session with the
access to the Callhome, Capture, and
modifications to the Call Home database.
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome)#> callhome . . .
SANbox (admin-callhome)#> profile . . .
SANbox (admin-callhome)#> capture . . .
When you are finished making changes, enter the Callhome Save command to
save the changes and close the Callhome Edit session. Changes take effect
immediately.
SANbox (admin-callhome)#> callhome save
To close the Callhome Edit session without saving changes, enter the Callhome
Cancel command.
SANbox (admin-callhome)#> callhome cancel
12-6
Show Setup Callhome
Start command. An Admin session prevents other accounts from making
Callhome Edit command. The Callhome Edit session provides
command to display the Call Home service
0.0.0.0
25
False
0.0.0.0
25
False
nobody@localhost.localdomain
<undefined>
<undefined>
nobody@localhost.localdomain
nobody@localhost.localdomain
True
Profile commands with which you make
S
59263-01 A