Zoning Save - Qlogic SANbox 5802V Interface Manual

A

Zoning Save

Saves changes made during the current Zoning Edit session. The system informs
you that the zone set must be activated to implement any changes.
Authority
Admin session and a Zoning Edit session.
Syntax
zoning save
Examples
The following is an example of the Zoning Save command:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #>
.
.
SANbox (admin-zoning) #> zoning save
The changes have been saved; however, they must be activated
before they can take effect -- see zoneset activate command.
59263-01 A
14 – Command Reference
Zoning Save
14-223