Chassis Traps - Qlogic 12000 User Manual

Operations and Administration
Configuration and Monitoring Features
1. Click the chassis view.
2. Click Config File Admin.
3. Click Subnet Manager Config File. The Subnet Manager Configuration
screen is displayed:
Figure 1-59 Subnet Manager Configuration File Screen
4. In the Upload Config File text box: enter the path to the alternate embedded
subnet manager file (qlogic_fm.xml). If the path is not known, the user can
use the Browse... button to locate it.
5. Once the new file is located, click the Upload button.
6. In the Subnet Manager Control window for the master subnet manager, click
Stop, Refresh, then Restart to have the new file become active.
7. If applicable in the Subnet Manager Control window for the slave subnet
manager, click Refresh to have the new file become active.

Chassis Traps

The Chassis Trap Control screen allows the user to set default trap scenarios related
to the switch.
1-36
Figure 1-60 Chassis Trap Control
S
D000101-000