Track Info (When One Track Is Selected) - Euphonix R-1 Operation Manual

Euphonix Version 4 Supplement to the R-1 Operation Manual
Number of samples of the
Length
Sound File to play.
Length from the beginning
of the playable portion of
the Sound File (Clip edge)
Fade In
to where fade in is com-
pleted (first 100% volume
sample)
Length from the end of the
playable portion of the
Fade Out Sound File (Clip edge) to
where fade out starts (last
100% volume sample)
6.3.2

Track Info (when one track is selected)

Parameter Name
Track Name
Cursor Position
Cursor Track
Clip Length = (Sound File Length – Head Trim) – Tail
Trim
Editing the Length changes the Tail Trim
Set by the cross-fade time for Punch In/Out points dur-
ing record. Once recorded the crossfade time for each
clip is unique and editable.
Actual crossfades require two Clips be overlapped. If not
overlapped, then a fade in or out occurs.
When a new Clip is formed by cutting or copying a por-
tion of an existing Clip, the fade parameters of the origi-
nating Clip are used in the new Clip (until edited).
Fade shapes are linear.
Set by the cross-fade time for Punch In/Out points dur-
ing record. Once recorded the crossfade time for each
clip is unique and editable.
Actual crossfades require two Clips be overlapped. If not
overlapped, a fade in or out occurs.
When a new Clip is formed by cutting or copying a por-
tion of an existing Clip, the fade parameters of the origi-
nating Clip are used in the new Clip (until edited).
Fade shapes are linear.
Table 6-2 Track Info
Meaning
The name of currently
selected Track
The current Cursor
position with respect
to time.
The current Track to
which the Cursor is
pointing
Editing and Selection Features
Editable Comments/Constraints
Editable Editing changes the Track name
Move the pointer to change.
Adjustable
Updates continuously to allow for
elsewhere
accurate positioning.
Move the pointer to change.
Adjustable
Updates continuously to allow for
elsewhere
accurate positioning.
61