Chapter 5: Locator And Track Controls; Track Controls; Avoid Disarming Tracks; Monitoring - Euphonix R-1 Operation Manual

Euphonix Version 4 Supplement to the R-1 Operation Manual

Chapter 5: Locator and Track Controls

This chapter discusses changes to the track and Locator functions. While the Locator
changes are mostly small conveniences, the track control changes affect monitoring
and are fundamental to the R-1 operation.
• All Repro and Auto Input are now mutually exclusive.
• The R-1 creates multichannel files when recording channels are linked. This
feature is not new, but is now more significant in relation to file importing and
exporting.
• The Reel Trim key on the Remote can locate within the Title.
• The Cue Track in the R-1 software Multitrack panel now accepts and responds
to the trackball pointer.
• The Next and Previous Locator keys can be pressed together with the Wave
key to locate Clip edges.
5.1

Track Controls

5.1.1

Avoid Disarming Tracks

In the Track Memory panel (activated by the Trk Mem button next to the transport con-
trols), you can set Recall never disarms Tracks to protect against popping tracks out
of record when performing a track status recall.
5.1.2

Monitoring

All Repro and Auto Input are now mutually exclusive. When All Input or All Repro is
selected, Auto Input is ignored in monitoring but continues to be lit if enabled. If Auto
Input is enabled while in All Repro or All Input, the action forces the track controls
back to Individual. If the user disables Auto Input while in All Repro or All Input, there
is no additional effect.
All Repro overrides the Input/Repro LEDs when stopped.
See page 194 of the R-1 Operation Manual for global Track Controls.
43