Track Edit Popup Menu - Euphonix R-1 Operation Manual

Euphonix Version 4 Supplement to the R-1 Operation Manual
It is also possible to display the Sound File name for each Clip. It may help to turn off
the waveform display because names are easier to read against a plain block of color.
Showing the name of the Sound File can assist import and export operations. However,
if the file name display is too much information (i.e., it can obscure the waveform) it
too can be turned off. The selected Clip and any Clip under the trackball cursor will still
display its name.
To disable the waveform view and/or the file name view on any given Track:
1. Right-click on the Track Name.
The Track Edit popup menu appears.
2. Select Display Waveforms and/or Display File Names.
Each item's state toggles when selected.
3. To globally set the Display Waveforms and/or Display File Names for all
tracks, press the Wave + (Select Enable) Select All keys.
All tracks are highlighted.
4. Right-click over any one of the selected tracks.
Enabling/disabling either display mode affects all tracks.
Figure 3-2 Track Edit popup menu
14
Display Features