Clip Edge Locating - Euphonix R-1 Operation Manual

Hide thumbs Also See for R-1:

Table of Contents

Euphonix Version 4 Supplement to the R-1 Operation Manual

5.2.4

Clip Edge Locating

Use the Next and Previous keys to jump sequentially from Cue to Cue. Press the Wave

and Next/Previous keys simultaneously to locate to Clip edges. All Clips on all tracks

are included according to their time.

On the Remote

> |

With the Now Line positioned as shown above, the Wave+Next keys jump to the next

Clip edge in the numbered sequence. Trailing Clip edges will also be detected in both

directions.

Snap to edge of clip without the remote (works on TS also) by holding down Alt key

and pressing either Next Cue or Previous Cue on the screen transport controls.

Locator and Track Controls

| <

Table of Contents

Do you have a question about the R-1 and is the answer not in the manual?