On-Line Help System Overview; Software Licensing - Emerson E2 Installation And Operation Manual

flipped from OFF to ON and from ON to OFF by
commands sent from E2 through MODBUS or a
Square D Smart Breaker Gateway board. Refer to
this manual for more information on the Square D
Breaker Panel application.
• Eaton Breaker Control Manual (P/N 026-1709) -
E2 can communicate directly with Eaton's Breaker
Control Bus (BCB) modules. Communication with
the E2 (minimum E2 firmware rev. 2.82) will
enable users to access features such as Time Sched-
ules, Enhanced Lighting, and Logging, with the the
added capabilities of dial-out on failure and offsite
remote connection, specifically with UltraSite32
and Site Manager to the breaker panel. The Eaton
Breaker Panel controller is a licensed application
available in the E2 300 and 400 model controllers.
Refer to this manual for more information on the
Square D Breaker Panel application.
• Energy Meter Manual (P/N 026-1726) - The
Energy Meter provides a solution for measuring
energy data with a single device. Inputs include
Control Power, CT, and 3-phase voltage. The
Energy Meter supports multiple output options,
including solid state relay contacts, Modbus (with
or without data logging), and pulse. The LCD
screen on the faceplate allows instant output view-
ing.
• iPro DAC (P/N 026-1727) - The iPro DAC is a
packaged HVAC control board for use either as a
stand-alone controller or in zone control applica-
tions using a Retail Solutions E2 BX building con-
trol system. The iPro DAC is capable of controlling
heat and cool stages, fans, humidification and dehu-
midification devices and economizers using on-
board I/O and control algorithms, as well as moni-
tor and interact with other building control systems
and peripherals (such as smoke alarms and CO2
sensors).
1.6 On-Line Help System
Overview
The E2 On-Line Help is the primary source front-
panel/interface users will have to consult when seeking
instruction on properties, screens, menus, and trouble-
shooting of hardware/software problems. The on-line help
topics are designed to minimize the time the user would
otherwise have to spend searching through the manual to

find information. Press
General Help menu.

On-Line Help System Overview


+ keys to open the
To use on-line help from any screen in the E2 front
panel interface, simply press the E2's permanent Help

key. This opens a pop-up window containing either
information about the screen or menu you are currently on,
or information about the input, output, or setpoint you
have highlighted with the cursor (if available). After the

key has been pressed,  will open the Gen-
Help
eral Help menu containing Troubleshooting options.
1.7

Software Licensing

Some applications in the E2 are available only when
activated with a unique license key that is obtained
through Retail Solutions. Software licensing (see Section
10.15, License Management) allows the user to activate
certain features in the E2, such as Web Services and third-
party controllers. Call your Retail Solutions sales repre-
sentative at 770-425-2724 for more information about
software licensing.
• -
Introduction 1 7