DGS-3312SR Gigabit Layer 3 Switch
Download Configuration File
To download a configuration file from a TFTP server, click on the Maintenance folder and then the TFTP Service folder
and then the Download Configuration File link:
Figure 9- 2. Use Configuration File on Server window
Enter the IP address of the TFTP server and specify the location of the Switch configuration file on the TFTP server.
Click Apply to record the IP address of the TFTP server.
Click Start to initiate the file transfer.
Save Settings
To upload the Switch settings to a TFTP server, click on the Maintenance folder and then the TFTP Service folder and
then the Save Settings link:
Figure 9- 3. Save Settings To TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server. Click Apply to
make the changes current.
Click Start to initiate the file transfer.
Save History Log
To upload the Switch history log file to a TFTP server, click on the Maintenance folder and then the TFTP Service folder
and then the Save History Log link:
Figure 9- 4. Save Switch History To TFTP Server window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server. Click Apply to
make the changes current.
Click Start to initiate the file transfer
Ping Test
PING is a small program that sends data packets to the IP address you specify. The destination node then returns the
packets to the Switch. This is very useful to verify connectivity between the Switch and other nodes on the network.
196