D-Link DGS-3312SR Product Manual page 141

This window displays the following information:
Parameter
Interface Name
Authentication type
VRID
Virtual IP Address
Virtual MAC Address
Virtual Router State
Admin. State
DGS-3312SR Gigabit Layer 3 Switch
Figure 5- 47. VRRP Interface Entry Display window
Description
An IP interface name that has been enabled for VRRP. This entry must have been
previously set in the IP Interface Settings window.
Displays the type of authentication used to compare VRRP packets received by a
virtual router. Possible authentication types include:
No authentication – No authentication has been selected to compare VRRP packets
received by a virtual router.
Simple Text Password – A Simple password has been selected to compare VRRP
packets received by a virtual router, for authentication.
IP Authentication Header – An MD5 message digest algorithm has been selected to
compare VRRP packets received by a virtual router, for authentication.
Displays the virtual router ID set by the user. This will uniquely identify the VRRP
Interface on the network.
The IP address of the Virtual router configured on the Switch.
The MAC address of the device that holds the Virtual router.
Displays the current status of the virtual router. Possible states include: Initialize,
Master and Backup.
Displays the current state of the router. Up will be displayed if the virtual router is
enabled and Down if the virtual router is disabled
128