Snmp User Table - D-Link DGS-3312SR Product Manual

SNMP settings are configured using the windows located on the SNMP V3 folder of the web manager. Workstations on
the network that are allowed SNMP privileged access to the Switch can be restricted with the Security IP Management
window (located in the Security folder under Trusted Host).

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
Open the Management folder and then the SNMPV3 folder. Finally click on the SNMP User Table link. This will open
the SNMP User Table, as shown below.
To delete an existing SNMP User Table entry, click on the X icon below the Delete heading corresponding to the entry you
want to delete.
SNMP User Table Display
To display the detailed entry for a given user, click on the blue hyperlinked User Name. This will open the SNMP User
Table Display window, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
SNMP Version
Auth-Protocol
DGS-3312SR Gigabit Layer 3 Switch
Figure 7- 4. SNMP User Table window
Figure 7- 5. SNMP User Table Display window
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
This name is used to specify the SNMP group created can request SNMP messages.
V1 – Indicates that SNMP version 1 will be used.
V2 – Indicates that SNMP version 2 will be used.
V3 – Indicates that SNMP version 3 will be used.
None − Indicates that no authorization protocol is in use.
155