Switch Ip Settings - D-Link DGS-3312SR Product Manual

DGS-3312SR Gigabit Layer 3 Switch
Figure 3-2. Switch Information (Basic Settings) window
This window displays general information about the Switch including its MAC Address, Hardware Boot PROM and
Firmware versions, and installed module information.

Switch IP Settings

Switch IP settings may initially be set using the console interface prior to connecting to it through the Ethernet. If the
Switch IP address has not yet been changed, read the Introduction of the CLI Reference or skip ahead to the end of this
section for a quick description of how to use the console port and CLI IP settings commands to establish IP settings for the
Switch.
To change IP settings using the web manager you must access the Switch IP Settings window located in the
Configuration folder.
To configure the Switch's IP address:
Open the Configuration folder and click the IP Address button. The web manager will display the Switch IP Settings
window below.
Figure 3-3. Switch IP Settings window
23