Enter the server IP address and the path and filename of the firmware file on the server. Note that in many instances the
firmware file is in the root directory of the C drive of the server.
Note: The TFTP server must be running TFTP server software to perform the file transfer. TFTP
server software is a part of many network management software packages, or can be obtained as a
separate program.
Highlight APPLY and press Enter record the IP address of the TFTP server. Use Save Changes from the Main
Menu to enter the address into NV-RAM
Highlight START and press Enter to initiate the file transfer.
Download Configuration File from TFTP Server
To download a switch configuration file from a TFTP server, highlight Download Configuration File from TFTP
Server on the Switch Utilities menu and press Enter.
Figure 6-67. Upgrade Firmware from TFTP Server screen
8-port Gigabit Ethernet Switch User's Guide
118