Snmpv3 - D-Link DGS-3312SR Product Manual

Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New
Password. Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
Modify or delete an existing user account in the User Account Modify Table window. To delete the user account, click on
the Delete button. To change the password, type in the New Password and retype it in the Confirm New Password entry
field. Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
Admin and User Privileges
There are two levels of user privileges: Admin and User. Some menu selections available to users with Admin privileges
may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
After establishing a User Account with Admin-level privileges, be sure to save the changes (see below).

SNMPV3

The DGS-3312SR incorporates a flexible SNMP management for the Switching environment. SNMP management can be
customized to suit the needs of the networks and the preferences of the network administrator. Use the SNMP V3 windows
to select the SNMP version used for specific tasks.
The DGS-3312SR supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The SNMP version
used to monitor and control the Switch can be specified by the administrator. The three versions of SNMP vary in the level
of security provided between the management station and the network device.
DGS-3312SR Gigabit Layer 3 Switch
Figure 7- 3. User Account Modify Table window
Admin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Table 7- 1. Admin and User Privileges
User
Read Only
Read Only
Read Only
No
PING Only
No
No
No
154