Snmp Community Table - D-Link DGS-3312SR Product Manual

SNMP Group Table Configuration
The following parameters can be set:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Security Level

SNMP Community Table

Use this table to create an SNMP community string to define the relationship between the SNMP manager and an agent.
The community string acts like a password to permit access to the agent on the Switch. One or more of the following
characteristics can be associated with the community string:
DGS-3312SR Gigabit Layer 3 Switch
Figure 7- 11. SNMP Group Table Configuration window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
This name is used to specify the SNMP group created can request SNMP messages.
Specify a SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPv2 – Specifies that SNMP version 2c will be used. The SNMP v2c supports
both centralized and distributed network management strategies. It includes
improvements in the Structure of Management Information (SMI) and adds some
security features.
SNMPv3 – Specifies that the SNMP version 3 will be used. SNMP v3 provides
secure access to devices through a combination of authentication and encrypting
packets over the network.
NoAuthNoPriv − Specifies that there will be no authorization and no encryption of
packets sent between the Switch and a remote SNMP manager.
AuthNoPriv − Specifies that authorization will be required, but there will be no
encryption of packets sent between the Switch and a remote SNMP manager.
AuthPriv − Specifies that authorization will be required, and that packets sent
between the Switch and a remote SNMP manger will be encrypted.
159