Pae System Control; Radius Server - D-Link DGS-3312SR Product Manual

QuietPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuth

PAE System Control

To set the port authenticating settings, open the Port Access Entity folder, and then the PAE System Control folder.
Finally click on the 802.1X Capability Settings link.
802.1X Capability Settings
To set up the Switch's 802.1X port-based authentication, select which ports are to be configured in the From and To fields.
Next, enable the ports by selecting Authenticator from the drop-down menu under Capability.
Click Apply to make your changes take effect.

RADIUS Server

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection
against a sniffing, active hacker.
DGS-3312SR Gigabit Layer 3 Switch
Select the time interval between authentication failure and the start of a new
authentication attempt.
Select the time to wait for a response from a supplicant (user) for all EAP packets,
except for the Request/Identity packets.
Select the length of time to wait for a response from a Radius server.
Select the maximum number of times to retry sending packets to the supplicant.
Select the time interval between successive re-authentications.
Enable or disable reauthentication.
Figure 4- 16. 802.1X Capability Settings window
51