D-Link DGS-3312SR Product Manual page 100

Replace Dscp(0-63)
Vlan Name
Source Mac
Destination Mac
802.1p(0-7)
Ethernet Type
Configure the Access Rule Configuration settings on the window above.
The following parameters can be set:
Parameter
Profile ID
DGS-3312SR Gigabit Layer 3 Switch
user priority re-written to its original value before being transmitted from the switch.
Select this option to instruct the Switch to replace the DSCP value (in a packet that
meets the selected criteria) with the value entered in the adjacent field.
Allows the entry of a name for a previously configured VLAN.
Source MAC Address - Enter a MAC Address for the source MAC address.
Destination MAC Address - Enter a MAC Address mask for the destination MAC
address.
Enter a value from 0 to 7 to specify that the access profile will apply only to packets
with this 802.1p priority value.
Specifies that the access profile will apply only to packets with this hexadecimal
802.1Q Ethernet type value (hex 0x0-0xffff) in the packet header. The Ethernet type
value may be set in the form: hex 0x0-0xffff, which means the user may choose any
combination of letters and numbers ranging from a-f and from 0-9999.
Figure 4- 54. Access Rule Configuration (IP) window
Description
This is the identifier number for this profile set.
87