Restart System - D-Link DGS-3312SR Product Manual

DGS-3312SR Gigabit Layer 3 Switch
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration
parameters to their factory defaults. If the Switch is reset with this option enabled, and Save Changes is not executed, the
Switch will return to the last saved configuration when rebooted.
The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving
these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is
not executed, the Switch will return to the last saved configuration when rebooted.
In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these
parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config
(above) followed by Save Changes.
Figure 9- 7. Factory Reset to Default Value window

Restart System

The following window is used to restart the Switch.
Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before restarting
the Switch.
Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch. All of the
configuration information entered from the last time Save Changes was executed will be lost.
Click the Restart button to restart the Switch.
198