D-Link DGS-3312SR Product Manual page 180

The following field can be set:
Parameter
Unit
Port
Clear
Time Interval <1s>
Record Number
<200>
Show/Hide
DGS-3312SR Gigabit Layer 3 Switch
Figure 8- 4. Utilization window
Description
Allows you to specify a Switch in a Switch stack using that Switch's Unit ID. The
number 15 indicates a Switch in standalone mode.
Allows you to specify a port to monitor from the Switch selected above.
Clicking this button clears all statistics counters on this window.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Check to display Utilization.
167