D-Link DGS-3312SR Product Manual page 187

Figure 8- 11. Tx Packets Analysis (table for Bytes & Packets) window
Select the desired Switch using the Unit drop-down menu and the desired port using the Port drop-down menu. The Time
Interval field sets the interval at which the error statistics are updated.
The following fields can be set or are displayed:
Parameter
Unit
Port
Clear
View Table
View Line Chart
Bytes
Packets
Time Interval <1s>
Record Number
<200>
Show/Hide
DGS-3312SR Gigabit Layer 3 Switch
Description
Allows you to specify a Switch in a Switch stack using that Switch's Unit ID. The
number 15 indicates a Switch in standalone mode.
Allows you to specify a port to monitor − from the Switch selected above.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
Counts the number of bytes successfully sent from the port.
Counts the number of packets successfully sent on the port.
The time between updates received from the Switch, in seconds. The default is 1s.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Check whether to display Bytes and Packets.
174