Indications - JVC GR-DV2000 Instructions Manual

Warning Indications
Indications Function
Displays the battery remaining power.
Remaining power level: high _],_---i-_l,_l,_
I
Remaining power level: exhausted J
As the battery power comes close to nil, the battery indicator _--7 blinks.
When the battery power is exhausted, power turns off automatically.
r3_] Appears when no tape is loaded. (_._ pg. 12)
CHECKTAPE'S ERASE Appears when the erase protection tab is set to "SAVE" while the Power
PROTECTION TAB Switch is set to "Q" or "_ ". (_-_ pg. 12)
Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette. (_._ pg. 90)
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
Appears if condensation occurs. When this indication is displayed, wait
] more than 1 hour until condensation disappears.
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
Appears if a tape is not loaded when the Recording Start/Stop Button is
TAPE[ pressed while the Power Switch is set to "El" or "_" and the Shooting
Mode Switch is set to "VIDEO".
TAPE END Appears when the tape ends (luring recording or playback. (_° pg. 19)
DIFFERENT Appears if a tape in another format is loaded.
FORMATTED TAPE
eAppears when the date/time is not set. (_ pg. 11)
SET DATE/TIME[ • Appears when the built-in clock (lithium) battery is discharged and the
previously set date/time is erased. (_ _ pg. 11)
A. DUB ERROR[ Appears if Audio Dubbing is attempted on a blank portion of a tape.
(__ pg. 71)
A. DUB ERROR[
<CANNOT DUB
ON A LP RECORDED
TAPE>
<CANNOT DUB
ON A 16BIT
RECORDING>
<CHECK TAPE'S ERASE
PROTECTION TAB>
• Appears if Audio Dubbing is attempted on a tape recorded in the LP
mode. (_ pg. 71)
• Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
audio. (_° pg. 71)
• Appears if A. DUB (_) on the remote control is pressed when the erase
protection tab is set to "SAVE". (_ _ pg. 71)
INSERT ERROR[ Appears if Insert Editing is attempted on a blank portion of a tape.
(_° pg. 72)
CONTINUED ON NEXT PAGE