JVC GR-DV2000 Instructions Manual page 12

Digital video camera
Hide thumbs Also See for GR-DV2000:
Table of Contents

Advertisement

Erase
protedio.
Loading/Unloading
A Cassette
The camcorder
needs to be powered
up to load or eject a
cassette.
PUSH HERE
I
2¸2¸2¸2¸2¸¸
Cassette
holder
cover
OPEN/EJECT
Switch
Make sure the
window
side is
facing out,
holder
* To Protect
Valuable
Recordings...
.... slide the erase protection
tab on tire back of
the tape in the direction
of "SAVE". This
prevents
the tape from being
recorded
over.
To record
on this tape, slide the tab back to
"REC" bek)re
loading
it.
Be sure to press only the section labeled "PUSH
HERE" to close the cassette holder; touching
other [)arts may cause your finger to get caught
in the cassette holder, resuhing in injury or
product damage.
Slide and hold OPEN/EJEcT in the direction of the
arrow then pull the cassette holder cover open until it
locks. The cassette holder opens automatically.
• Do not touch internal conlponents.
Insert or remove
a tape and press "PUSH
HERE" to
close the cassette
holder.
• Once the cassette
holder
is closed,
it recedes
autorrratically.
Wait
until it recedes
corrrpletely
before closing
the cassette holder
cover.
• When
the battery's
charge
is low, you may not be
able to close the cassette holder
coven
Do not
apply
force. Replace
the battery
with
a fully
charged
one before continuing.
Close the cassette holder
cover firmly
until it Iocl<s
into [)lace.
Approximate
recording
time
Recording
mode
Tape
SP
LP
30 min.
-_0 rain.
45 rain.
60 rain.
60 min.
90 min.
80 min.
80 rain.
120 min.
NOTES:
• It takes a few second*
for the cassette holder
to open.
Do not apply
force.
• If you wait a few second*
and the cassette holder
does not open, close the cassette holder
cover and try
again.
If the cassette holder
still does not open, tunl
the camcordfr
off then on again.
• If the tape does not load properl);
open the cassette holder
c_)ver fully and remove
the cassette. A few
minutes
late_; insert it again.
• When
the camcorder
is suddenly
moved
from a cold place
to a wanr_ environment,
wait a short time before
opening
the cassette holder
cover.
• Closing
the cassette
holder
cover bei_,r_ the cassette
holder
comes
out may cause damage
to the camcorder.
• Even when
the camcorder
is switched
ofi_ a cassette can be loaded
or unloaded.
After
the cassette holder
is
closed
with
the camcorder
switched
ofi: however,
it may not recede.
It is recommended
to turn the power
on
before
loading
or unloading.
• When
resuming
recording;
once you open
the cassette holder
cover
a bbnk
portion
will be recorded
on the
tape or a previously
recorded
scene will be erased (recorded
over) r_gardl_ss
of whether
the cassette
holder
came
()tit or not. See page 2 _ for infonr_ation
about
recording
from the middle
of a tape.

Advertisement

Table of Contents
loading

Table of Contents