JVC GR-DV2000 Instructions Manual page 74

7. The cassette will not load 7. • The cassette is in tile wrong 7. • Set it in tile right position
properly, position. (_ _ pg. 12).
• The battery's charge is low. • hrstall a fully charged
battery (z _ pg. 8, 9).
8. Tile memory card will not 8. • Tile memory card is in the 8. • Set it in tile right position
load properly, wrong position. {z _ pg. 13}.
9. In the 5-Second mode, 9. • The 5-Second mode is set to 9. • Select "5S" in the Menu
recording ends before "ANIM." in the Menu Screen (_° pg. _3).
5 seconds have elapsed. Screen.
10. Snapshot mode cannot be 10. • The Squeeze mode is
used. selected.
11. The color of Snapshot 11.
looks strange.
10. • Disengage the Squeeze
mode (t_ _" pg. 30k
//.
•
Find a white subject and
compose your shot so that it
also appears in the frame
(z _ pg. 20, 21 ).
• Turn off Sepia and Mono-
tone (_ pg. 36, 37).
15. Program AE with special 15. ,, Tile Power Switch is set to
effects and Fade/Wipe "t'_".
Effects do not work.
16. The Black & White Fader 16. • The Sepia or Monotone 16. • Turn off Sepia and Mono-
does not work. mode is activated, tone (_ pg. 34, 36).
/2. Tile image tal<en using /2. • Shooting was performed
Snapshot is too dark. under backlit conditions.
/3. Tile image taken using /3. • Tile subject is too bright.
Snapshot is too bright.
14. Digital Zoom does not 14.
work.
• The light source or the
subject does not include
white. Or there are various
different light sources behind
the subject.
• Tile Sepia or Monotone
mode is activated.
• 10X optical z()om is selected.
• Tile Shooting Mode Switch is
set to "XGA/VGA" or
"UXGA".
• "PROGRAM AE" is set to
"VIDE(-) ECHO" in the Menu
Screen.
• "WIDE MODE" is set to "PS-
WIDE" in the Menu Screen.
• Multi-Analyzer 4 or Multi-
Analyzer 9 was attempted
during Digital Zoom.
• Picture Wipe or Dissolve are
being used in a scene
transition.
12. • Press tile BACKLIGHT
Button (_ pg. 38).
13. • Set "PROGRAM AE" to
"SPOTLIGHT" in the Menu
Screen (t _ pg. _6).
14. • Set "ZOOM" to "40X" or
"300X" in the Menu Screen
(_° pg. 29).
• Set the Shooting Mode
Switch to "VI DEC)"
(_° pg. 14, 22).
• Disengage the "VI DE(-)
ECHO" mode
(_° pg. 22, 37).
• Disengage the "PS-WI DE"
mode (z_ _ pg. 30k
• Disengage Muhi-Analyzer 4
or Multi-Analyzer 9
(_ pg. 20).
• Wait until the Picture Wipe
or Dissolve effects are
completed (_ pg. 22, 34).
15. * Set the Power Switch to
"[_]" (t_ pg. 34, 36).