JVC GR-DV2000 Instructions Manual page 26

Button
Power Switch
Lock Button
Video image
Still image
FOCUS Ring
Shooting
Mode Switch
SNAPSHOT Bution
7l,
Released position
Half-pressed
position
Fully-pressed
position
FOCUS Button
DualShooting
Lets you record images on a tape and store still irrrages in a
memory card simultaneously. In other words, it is possible
to store still images in the memory card without
interrupting image recording on the tape.
Set the Shooting Mode Switch to "VIDEO", then set
the Power Switch to "{_]" while pressing down the
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
Set "CAMERA MODE" to "DUAL" in the Menu
Screen (z_ _pg. 28, 29).
While recording to a tape, press SNAPSHOT halfway.
A still image is displayed in the lower right corner of
the screen where the video image being recorded is
displayed.
• At this moment, if you release SNAPSHOT,
snapshot recording will be canceled.
PressSNAPSHOT fully. The displayed still image is
stored in the memory card.
NOTES:
• If SNAPSHOT is pressed in the Record-Standby mode,
only a stiff image is stored in the memoly card. Video
recoMing does not take place.
• If SNAPSHOT is pressed when "DIS" is set t*> "ON"
(_-_ pg. 29), the Stabili7er will be disabled.
• The Stabilizer is loss eflZ(tive in the DUAL mode than in
other modes.
• Still images a_> stored in &e memory card in V(;A mode
file si7e (_ _ pg. 14).
• When "CAMERA MODE" is set t_) "DUAL'; all Fade/
Wipe EflZ( t_ and some Pr_gram AE with special eflbct_
cannot be used (_pg. _4 _;7).
• The optional flash (_° pg. 8_) will not light during video
recording.